1、写字楼装饰开工前，施行图纸会审准则
1. Implementing the Drawing Judgment Criteria before the Construction of Office Decoration
图纸未经会审，坚决不允许施工，做到尽可能地减少图纸上存在的错、漏、缺等问题，施行图纸质量连带责任制，以增强各方责任心，防止图纸会审流于形式，造成变更、返工影响工程质量。
The drawings are not allowed to be constructed without consultation, so as to minimize the problems of mistakes, omissions and deficiencies in the drawings, and implement the joint and several responsibility system for the quality of the drawings, so as to enhance the sense of responsibility of all parties and prevent the drawings from becoming mere formalities, resulting in changes and rework affecting the quality of the project.
2、依据装饰工程投标文件的许诺、工程的特色编制出监理的施行细则，以确保监理自身的质量确保体系完好、准则及管理架构健全。
2. According to the promise of the bidding documents of decoration projects and the characteristics of the projects, the detailed rules for the implementation of supervision are worked out to ensure the quality of supervision itself and the sound system, criteria and management structure.
3、对写字楼装饰要害工序施工，制订专项的监理施行细则并要求北京装饰公司编制专门的施工计划。
3. To construct the key working procedure of office building decoration, formulate special supervision and implementation rules and require Beijing Decoration Company to draw up special construction plan.
4、推行各装饰工序的样板引路准则，严厉按《工程质量通病防治手册》要求的内容，对简单出现的各种质量通病问题进行专项技能交底。
4. Implementing the model guideline of each decoration process, strictly according to the content of the "Handbook for the Prevention and Control of Common Quality Diseases of Engineering", and giving a special skill account of various common quality problems that appear simply.
查看好施工单位的施作业业指导书及各种施工计划，从源头上、准则上规范样板引路的运作。装饰工程依据项目施工图纸分，分单体，列出样板分项，清晰样板施行地点、部位、时间、检验规范，做好每个样板间如：“砌体样板间”、“抹灰样板间”、“面砖镶贴样板间（墙）”、“门窗样板间”、“吊顶样板间”等，后才以点带面进行铺开作业。
Check the instructions of construction units and various professional construction plans, and standardize the operation of the model guide from the source and criteria. Decoration works are divided into specialties and monomers according to the construction drawings of the project, listing the sub-items of the template, clarifying the implementation site, location, time and inspection criteria of the template, and doing a good job in each sample room, such as: "masonry sample room", "plastering sample room", "face brick patch sample room (wall),"door and window sample room","ceiling sample room", etc., before the paving operation is carried out with points and surfaces.
5、做好装饰资料的操控作业
5. Manipulating Decoration Materials
写字楼装饰一般触及的资料种类较多，所断定的资料的规范、种类、制造应符合设计图纸和施工检验规范的要求，特别是要求满意《民用建筑室内环境污染操控规范》要求，到达绿色规范的资料。对于资料的断定操控方面，选用资料看样定板的方法进行断定，所需的资料必须经施工单位由监理可组织，参建各方审核断定封板这一程序。对首要的原资料的进行监理的操控手段可在如下四个阶段过程中进行操控：（1）定货前的操控；（2）进货后的操控；（3）现场制造资料的操控；（4）现场使用资料的操控。
There are many kinds of information touched by office decoration. The specifications, types and manufacture of the information determined should meet the requirements of design drawings and construction inspection standards, especially the requirements of the National Code for Indoor Environmental Pollution Control in Civil Buildings, and reach the information of green environmental protection standards. For the determination and control of data, the method of looking at the sample and fixing the plate is used to make the determination. The required data must be recommended by the construction unit and organized by the supervision. The parties involved in the construction shall examine and determine the sealing plate. The operation means of supervising the primary raw materials can be operated in the following four stages: (1) pre-order control; (2) post-purchase control; (3) on-site manufacturing data control; (4) on-site use of data control.
6、查看装饰公司的人员、机械等所投入情况
6. Check the investment of personnel, machinery, etc. in decoration companies
看是否能足施工进度及质量要求，装饰公司所投入的人员素质是影响装饰工程质量的要害，因此必需要求工种应齐全，对各工种大工与小工的份额作必定的约束，特种工还要持证上岗，首要作业必定要有技能娴熟的技能工人进行把关。设备方面要齐全，其功能应坚持杰出，才能确保施工资料加工质量，机械设备要满意施工要求。
To see whether the construction progress and quality requirements can be met, the quality of personnel invested by decoration companies is the key to affect the quality of decoration projects. Therefore, it is necessary to require complete types of work, to make certain constraints on the share of various major and minor workers, special workers should also hold certificates, and skilled workers must be the first job to check. The equipment should be complete and its function should be outstanding so as to ensure the quality of construction data processing, and the mechanical equipment should satisfy the construction requirements.
7、清晰写字楼装饰质量操控方针，严厉按合同要求质量方针要求
7. Clear quality control policy for office decoration and strict quality policy requirements according to contract requirements
从每个工序的质量从操控下手，组织建立质量操控小组来组织开展工程质量的各项管理作业。特别对质量通病加以仔细研究，拟定出切实可行的质量通病防治办法，切实做到预防为主并在施工单位各级质管人员参加技能研讨会，将办法执行工人班组。同时还有针对性地加强对新技能新工艺的使用、操控和监督，确保质量方针的实现。
Starting from the quality control of each process, a quality control group is organized to organize and carry out various management operations of Engineering quality. Particularly, we should carefully study the common quality failures and work out practical measures to prevent them. We should give priority to prevention and take part in skill seminars for quality managers at all levels in construction units, so as to execute worker teams. At the same time, the use, control and supervision of new skills and processes should be strengthened to ensure the full realization of the quality policy.
This is the content of Jinan office decoration http://www.saiyunzs.com. Thank you for checking our company's information during your busy schedule. If you want to know more, you are welcome to call for consultation!
